| PH | 6.0~7.0 |
| Storage Condition | 贮存时请注意密封保存，存放于干燥、通风处，常温下有效期为12个月。 |
| Physical and Chemical Properties | This product is an acrylic copolymer self-crosslinking water emulsion, which has the advantages of good film-forming property, high film strength, softness, brightness, aging resistance, etc. |
| Use | Suitable for coating and filling various types of leather, clothing leather, and soft leather. |
| Caution | Non hazardous materials, not edible, avoid contact with the eyes, can be transported as general chemicals. |
Wash butyl acrylate with alkaline water and add it to a polymerization kettle containing deionized water. Stir and disperse, then add sodium dodecyl sulfate and stir to form an emulsion. Heat again to 50 ℃ and add methyl acrylate dropwise. After dripping, add the initiator (1.5% ammonium persulfate aqueous solution) dropwise, add 3/5 of the total amount within 20 minutes, and react at 80-90 ℃. When the temperature drops to 70 ℃, continue to add the remaining ammonium persulfate aqueous solution. Stir at 80-90 ℃ for 1 hour. Vacuum distillation, separation of unreacted monomers, cooling and discharging to produce finished products.
| use | suitable for finishing and filling of all kinds of leather, clothing leather and soft leather. |
| production method | after washing butyl acrylate with alkaline water, it is added into a polymerization kettle filled with deionized water, stirred and dispersed, and then sodium dodecyl sulfate is added to stir into an emulsion. Reheating to 50°C. Methyl acrylate was added dropwise. After dropping, 1.5% ammonium persulfate aqueous solution of initiator was added 3/5 of the total amount within 20min, and the reaction was carried out at 80~90 ℃. When the temperature drops to 70°C, continue to add the remaining ammonium persulfate aqueous solution. Stir at 80~90 ℃ for 1h. Distillation under reduced pressure to separate unreacted monomers. The cooling discharge is the finished product. |